The shower trays used need to be practical and suitable for the cubicle more than anything else. It does not matter what the style or color is, it needs to serve the purpose. When a person uses the shower, water must drain continuously with no clogging. Another aspect to look for is that it fits the enclosure perfectly. There are no loose ends or gaps between the bathroom wall and the shower tray. The shower trays are either flat bottomed or slightly tilted.

When opting for the shower trays made of stone resin, they don’t need a base to hold them up. They can stand on their own, and will not get damaged. Some of the most popular shower trays come with a side tiling fitted in them. This helps keep water within their walls and doesn’t let it slip outside. If you want to lift the tray off the floor, then you need to create a base made of wood. The gap should be enough to fit the pipes and help smooth drain of water. Some of them come with special waste traps, which will collect all the grime and dirt, leaving the tray clean.

At the time of installation of the shower trays, decide on what model you have chosen. Following that, you can build the base and seat the trays on top of it. Make sure to hammer it into place, so it doesn’t wobble later on. In most cases, the bottom is sloped and the pipe connected to the drain pipe should be led to an outlet that does not allow water to accumulate. Those pipes must also be checked and only when green signal obtained for the plumbing do you go ahead and put your shower trays in place.

Rectangle, square, or quadrant, these are the options one has in picking out their shower trays. If you want to get adventurous, you could pick out a ceramic tray and fit it with colorful tiles. But keep in mind; these had better be slip proof to protect the lives of people using the shower. In homes where there are only doors to half of the shower, remember to fit them deeper than the edge of the shower enclosure.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.

Before picking out the shower enclosures, make sure to sort out the shower trays as well. The size must be measured and accurate, better to compare it with that of the enclosure to avoid any unpleasant surprises. Most of these shower trays are made of stone resin or other durable material. These are the ones that can stand the water pressure, and not give in easily. They will also last long, and need little or no maintenance at all. The regular scrubbing and cleaning will keep it shining and sturdy for years to come. At times, upon insistence of the home owner, these shower trays are made of glass, or ceramic. But in such cases, be careful about usage, and don’t put too much pressure on them.

Next thing to look at is the shape of the enclosures. The shower trays need to be of the same shape and mould with the door fitted on the enclosures. Instead of trying to work at it on your own, it is best left to a professional to get it installed. The tiling on the wall, frame of the door on the shower cubicle all need to be in alignment and fit snuggly. One way of checking if it is fit correctly is to pour a glass of water, and see how it flows. If it goes straight to the drain, then the tray is fit well, else you need to make adjustments. But don’t overlook the spill over or leakage of water, as this could ruin the walls and the entire room in no time.

Since we invest quite a bit in the shower trays, get the best available, as this will keep your bathroom lively and perfect. Check with the dealer on the warranty that comes with the shower trays, and if you can, pick up extended warranty as well. It is wise to have the trays inserted a bit lower than the floor level, as this will avoid water from seeping under the door onto the bathroom floor. The drain pipe must also be fitted in the trays, and there must enough space for water to flow through, else it will stagnate.

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.